InSem-EndSem Evaluator
Check a 30:70 theory head against both the combined and applicable end-semester minima.
Your calculation
Result
The combined total must reach forty and the chosen end-semester minimum must also be met.
Your result will appear here
Complete the required fields to see the calculation.
Separate external minima are required under some SPPU patterns. 2015 engineering rules: 40% in end-sem and combined marks.
Combined theory head
Head cleared = combined marks >= 40 AND end-sem marks >= applicable component minimum- Practical, oral and term work are separate heads of passing.
- Enter marks as awarded, before any moderation is applied.
- The 2015 engineering rules require 40% in the end-semester exam as well as 40% combined; other patterns must be verified.
Check the source and scheme
This is a rule-based calculation, not an official certificate. Confirm the regulation and program on your marksheet before using the result.
- KPG College prospectus - reproduction of SPPU Circular 332/2020 (opens in a new tab)
Savitribai Phule Pune University Circular No. 332/2020 publishing the tiered CGPA to percentage equations for grades O, A+, A, B+, B, C and D, reproduced in the college prospectus.
- SPPU credit system and ATKT rules (opens in a new tab)
SPPU examination section rules on class and division bands and the number of backlog heads a student may carry forward.
How it works
Using the InSem-EndSem Evaluator in three steps
Every step below reflects the actual calculation this tool runs, so you can check the result by hand if you need to.
- 1
Enter the in-sem mark out of thirty and the end-sem mark out of seventy for the subject.
- 2
The tool checks the minimum required in the end-sem head on its own.
- 3
It then verifies the combined forty percent requirement for the theory head and reports the pass status.
About this tool
This evaluator checks a thirty-mark in-sem and seventy-mark end-sem theory head. It includes a separate end-semester minimum, defaulting to 28 under the 2015 engineering rules, and a target-marks planner. Confirm the requirements for your own pattern.
Grading guidance and conversion reference
SPPU (Savitribai Phule Pune University) Passing Criteria & Marks Rules
SPPU engineering uses a 70-mark end-semester and 30-mark in-semester assessment pattern. Combined 40% aggregate is required for theory heads.
| Assessment Component | Max Marks | Pass Marks | Official Guidelines |
|---|---|---|---|
| In-Semester Exam | 30 Marks | No separate minimum | Marks combine with end-semester exam score. |
| End-Semester Exam | 70 Marks | 28 Marks (40%) | Separate end-sem paper minimum required by pattern guidelines. |
| Combined Theory Head | 100 Marks | 40 Marks (40%) | Total score (In-sem + End-sem) must be >= 40. |
Grace Marks Policy
SPPU Ordinance 1 & 2 allow grace marks up to 1% of total maximum marks for passing borderline subjects or securing higher class distinction.
ATKT & Carry-Over Progression Guidelines
- ATKT rules permit progression to 2nd year if student clears at least 60% of 1st year credits.
- Progression to 3rd year requires clearing ALL 1st year subjects + passing minimum 2nd year credits.
- Maximum 6 years duration permitted to complete 4-year B.E. degree.
SPPU (Savitribai Phule Pune University) Key Terms & Grading Definitions
Official explanations for YGPA, DGPA, SPI, CPI, CGPA and Distinction criteria.
SPPU Circular No. 332 Tiered Conversion
Official Pune University circular defining slab-wise linear equations for O, A+, A, and B+ grade CGPA conversion into percentage.
First Class with Distinction
CGPA >= 7.75 on 10-point scale.
Downloading SPPU Circular No. 332 Conversion Certificate
Official instructions for downloading and verifying your university percentage conversion certificate.
SPPU Circular No. 332 of 2020 (Grade to Percentage Conversion)
Issuing Authority: Board of Examinations and Evaluation, SPPU PuneStep-by-Step Download Instructions
- 1Visit SPPU Examination Circulars Section (unipune.ac.in).
- 2Locate Circular No. 332/2020 titled 'Equivalence of CGPA into Percentage of Marks'.
- 3Download the signed circular PDF containing the tiered slab equations.
- 4Quote the exact equation corresponding to your CGPA slab on admission and placement forms.
Quick Conversion Lookup Table (SPPU Circular 332 Tiered Scale)
SPPU Circular No. 332/2020 tiered CGPA to percentage equivalence lookup table.
Formula: Percentage = Slab Equation (Circular 332)| SGPA / CGPA | Equivalent Percentage | Academic Division / Class |
|---|---|---|
| 6.00 | 56.25% | Check programme award criteria |
| 6.25 | 57.50% | Check programme award criteria |
| 6.50 | 58.75% | Check programme award criteria |
| 6.75 | 60.00% | Check programme award criteria |
| 7.00 | 62.50% | Check programme award criteria |
| 7.25 | 65.00% | Check programme award criteria |
| 7.50 | 67.50% | Check programme award criteria |
| 7.75 | 70.00% | Check programme award criteria |
| 8.00 | 72.50% | Check programme award criteria |
| 8.25 | 74.00% | Check programme award criteria |
| 8.50 | 77.00% | Check programme award criteria |
| 8.75 | 80.00% | Check programme award criteria |
| 9.00 | 83.00% | Check programme award criteria |
| 9.25 | 86.00% | Check programme award criteria |
| 9.50 | 90.00% | Check programme award criteria |
| 9.75 | 95.00% | Check programme award criteria |
| 10.00 | 100.00% | Check programme award criteria |
Frequently asked questions
Is there a separate minimum for the in-sem paper?
Passing requirements differ by programme and pattern. The 2015 engineering rules require both the end-semester minimum and combined minimum; confirm any additional in-sem requirement in your applicable regulations.
Does this cover practicals?
No. Practical and term work are assessed as their own heads of passing and must be cleared separately.
Does the in-sem mark carry to a reattempt?
The in-sem score is normally retained for the subject, so a reattempt usually concerns the end-sem paper only.
Are term work and practicals included here?
No. This evaluator covers the theory head. Term work and practicals are separate heads of passing with their own minimums.